SSM commands
Syntax
[no] keepalive-server {dns:<server-name>[:port-num] |
ipv4:<ipaddr>[:port-num]}
[interval <10-600>] [retries <1-10>]
[transport {tcp | udp }]
Table 427: Variable definitions
[no]
dns:<server-name>[:port-
num]
ipv4:<ip-addr>[:port-num]
interval <10-600>
retries <1-10>
transport {tcp | udp }
Example
AG/configure/voice/service/voip/ssm/sip-server#keepalive-server
10.10.0.1
configure terminal voice service voip ssm protocol-header
Use this command to configure the SIP header values.
Syntax
protocol-header [no] [retry-after-interval <0-4294967295>]
[organization-header <string>] [server-header <string>]
Table 428: Variable definitions
[no]
386
Command Line Reference
Variable
Variable
Comments? infodev@avaya.com
Value
Removes the specified configuration.
Specifies the DNS host name of the central SIP
server.
Specifies the IP address of the central SIP
server.
Specifies the interval in seconds at which to
send OPTIONS messages to the keepalive
server. Default value is 60.
Specifies the number of retries before changing
from normal to survivable mode, and vice versa.
Default value is 1.
Specifies the transport protocol. Default value
is udp.
Value
Removes the specified configuration.
August 2013