Show Qos Chassis Service-Policy - Avaya 2330 Reference Manual

Chassis QoS commands
Syntax
show qos chassis policy-map [<policy-map-name>] [class-map [<class-
map-name>]] [detail]
Table 222: Variable definitions
[<policy-map-name>]
[<class-map-name>]
[detail]
Example
AG# show qos chassis policy-map policy1

show qos chassis service-policy

Use this command to to view the policy maps that are applied to all applicable interfaces. The
output displays in the format of interface and inbound and outbound service policy maps.
Syntax
show qos chassis service-policy <interface-type> <interface-name>
[pvc <pvc-id>]
Table 223: Variable definitions
<interface-type>
<interface-name>
[pvc <pvc-id>]
Example
AG# show qos chassis service-policy ethernet 0/3
222 Command Line Reference
Variable
Variable
Comments? infodev@avaya.com
Value
Name of policy map to display. String(1-19).
If you do not specify a policy map name, the
system displays all the configured policy
maps.
Name of class map to display. String(1-19).
If you do not specify a class map name, the
system displays all the configured class
maps for the specified policy map.
Displays detailed information.
Value
Specifies the interface type: ethernet,
bundle, tunnel, vlan or crypto.
Name of the interface.
Specifies the PVC ID for Frame Relay
interfaces. Range: 16-1022.
August 2013