Packet filter commands
[routing {on|off}]
[log {on|off}]
[expire <expiry-time>]
[no]
Example
AG/configure/ ip/packet-filter ipfilter1# add permit tcp 10.1.1.1
10.2.1.1
configure ip packet-filter delete
Use this command to delete rule from the IPv4 packet filter.
Syntax
delete <1-65535>
Example
AG/configure/ ip/packet-filter ipfilter1# delete 1
configure ipv6 packet-filter
Use this command to configure the IPv6 packet filter.
Syntax
configure ipv6 packet-filter <packet-filter-name>
Table 289: Variable definitions
Variable
<packet-filter-name>
268
Command Line Reference
header flag. ack Matches the TCP ACK
header flag. psh Matches the TCP PSH
header flag. rst Matches the TCP RST
header flag. urg Matches the TCP URG
header flag.
Specifies whether filter of routing header is
on or off.
Allows a logging message to be reported to
the user when a rule match occurs (optional).
on: Turns on logging of matching packets.
off: Turns off logging the matching packet off
(default)
Specifies the rule expiry time in seconds
Removes the specified packet filter.
Value
name of the packet filter.
Comments? infodev@avaya.com
August 2013