Pots Dial Peer Configuration Commands; Configure Dial-Peer Voice Pots Clid; Configure Dial-Peer Voice Pots Digit-Strip - Avaya 2330 Reference Manual

POTS dial peer configuration commands

configure dial-peer voice pots clid

Use this command to configure calling-line ID information for the POTS dial peer.
By default, no calling-line ID information is configured.
Syntax
[no] clid {network-number <network-number> | restrict | substitute
<name> }
Table 362: Variable definitions
network-number <network-number>
restrict
substitute <name>
[no]
Example
AG/configure/dial-peer/voice/pots 10# clid network-number 5551111

configure dial-peer voice pots digit-strip

Use this command to enable digit stripping on a plain old telephone service (POTS) dial-peer
call leg. To disable digit stripping on the dial-peer call leg, use the no form of this command.
By default, digit stripping is enabled.
This command is applicable on POTS dial peers only. When a called number is received and
matched to a POTS dial peer, the matched digits are stripped and the remaining digits are
forwarded to the voice interface.
Syntax
[no] digit-strip
Command Line Reference
Variable
POTS dial peer configuration commands
Value
Specifies the calling party network number in
the CLID.
Configures caller-id restriction.
Specifies the display name when the display
name is unavailable.
Removes the configured CLID information.
August 2013 335