Configure Sip-Ua Sip-Domain - Avaya 2330 Reference Manual

SIP Media Gateway commands
• Both primary and secondary servers are monitored (keepalive target command is
executed for both primary and secondary).
• Primary, secondary, and tertiary servers are monitored (keepalive target command is
executed for primary, secondary, and tertiary).
Use this command to configure keepalives for the SIP server.
Syntax
keepalive [target sip-server [secondary | tertiary]] [retry <1-10>]
[trigger <1-10>] [timer <40-600>]
Variable
[target sip-server [secondary | tertiary]]
[retry <1-10>]
[trigger <1-10>]
[timer <40-600>]
Example
• AG/configure/sip-ua# keepalive target sip-server
• AG/configure/sip-ua# keepalive target sip-server secondary
• AG/configure/sip-ua# keepalive target sip-server tertiary

configure sip-ua sip-domain

Use this procedure to configure the domain of the Session Initiation Protocol (SIP) server
provider. This command is used for the host part of SIP URIs, and it specifies the common SIP
domain to be used when multiple keepalive servers are required.
Syntax
[no] sip-domain {dns:<host-name> | ipv4:<ip-addr>}
306 Command Line Reference
Value
Specifies to use the configured SIP server as
the target for keepalives. If the secondary or
tertiary option is included, the primary
secondary, and/or tertiary servers are
monitored.
Specifies the retry count before the server
status is set to down. Values range from 1 to
10 seconds. The default is 3 seconds.
Specifies a trigger count before the server
status is set to up. Values range from 1 to 10
seconds. The default is 1 second.
Specifies the interval at which keep-alive
OPTIONS are sent to the server. Values
range from 40 to 600 seconds.
Comments? infodev@avaya.com
August 2013