Ethernet interface commands
interface ethernet mtu
Use this command to configure the MTU size for an Ethernet interface.
Syntax
mtu <size>
Table 68: Variable definitions
<size>
Example
AG/configure/interface/ethernet (0/1)# mtu 9216
interface ethernet REM
Use this command to add comments at the beginning of the Ethernet area of a configuration
file.
Syntax
REM <string>
Table 69: Variable definitions
<string>
Example
AG/configure/interface/ethernet (0/1)# REM "Configured on July 30"
interface ethernet REM_
Use this command to add comments to an interface. The comments appear at the end of the
Ethernet area of a configuration file.
90
Command Line Reference
Variable
Variable
Comments? infodev@avaya.com
Value
Specifies the MTU size. Valid values are 64
to 9216. The default value is 1500.
Value
Specifies the comments. The string length
for comments is 80 characters. You must
enclose comments in quotation marks.
August 2013