Configure Qos Chassis Policy-Map Class-Map Police Trtcm - Avaya 2330 Reference Manual

Chassis QoS commands
Example
AG/configure/qos/chassis/policy-map map1/class-map class1/police#
srtcm cir 50 ebs 60 green-action permit

configure qos chassis policy-map class-map police trtcm

Use this command to configure trTCM related parameters to apply two-rate policing to a class
map in the inbound or outbound direction.
Syntax
[no] trtcm [cir <cir>] [cir-percentage <cir%>] [pir <pir>] [pir-
percentage <pir%>] [cbs <1 - 5000000>] [cbs-time <100-5000>] [pbs <1
- 5000000>] [pbs-time <100-5000>][green-action {permit | mark-dscp-
<value> | drop}] [yellow-action {permit | mark-dscp-<value> | drop}]
[red-action {permit | markdscp-<value> | drop}]
Table 219: Variable definitions
[cir <cir>]
[cir-percentage <cir%>]
[pir <pir>]
[pir-percentage <pir%>]
[cbs <1 - 5000000>]
[cbs-time <100-5000>]
[pbs <1 - 5000000>]
[pbs-time <100-5000>]
[green-action {permit | mark-dscp-<value> |
drop}]
218 Command Line Reference
Variable
Comments? infodev@avaya.com
Value
Committed rate in Kbps. Valid: 1 –
1000000.
Committed rate in percentage.
Peak rate in Kbps. Valid: 1 – 1000000.
Peak rate in percentage.
Committed burst size in Kbits. The valid
range corresponding to CIR should be >=
(100 msec * CIR)/1000 and <= (5000 msec *
CIR)/1000.
Committed burst size in milliseconds. The
valid range is 100 to 5000. Default value is
1000 ms.
Peak burst size in Kbits. The valid range
corresponding to PIR should be >= (100
msec * PIR)/1000 and <= (5000 msec * PIR)/
1000.
Peak burst size in milliseconds. The valid
range is 100 to 5000. Default value is 1000
ms.
Action to be taken on green packet. Valid
permit, mark-dscp-<value> or drop.
August 2013