Configure Process Cpu Threshold Process Notify - Avaya 2330 Reference Manual

CPU utilization commands
Table 440: Variable definitions
<%red>
<%green>
<interval>
<type>
Example
• AG/configure/process cpu# threshold total red 90 green 50
interval 10 notify cont
• AG/configure/process cpu# threshold total red 90 green 50
interval 10 notify once

configure process cpu threshold process notify

Use this command to configure the threshold notification for CPU utilization of individual
processes.
You can configure the system to generate an event notification for CPU utilization of each
individual process. This notification provides data regarding the peak and average CPU
utilization in percentages as well as the color (green/yellow/red) of each process. Notifications
can be generated either only once when the corresponding threshold is breached or
periodically at regular intervals.
Note:
Since there are nearly 90 processes that run on the advance gateway at a time, consider
configuring the system to generate the notification only once when the corresponding
threshold is breached rather than at regular intervals.
Note:
To receive these notifications, ensure the following:
400 Command Line Reference
Variable
Comments? infodev@avaya.com
Value
Red threshold in percentage. (Default: 85)
Green threshold in percentage. (Default: 70)
Duration in seconds for which the CPU
utilization is measured. You can enter
multiples of 10 up to a maximum of 300
seconds. (Default: 30)
• cont - this type generates notification
periodically at the interval specified.
• once - this type generates notification once
when the utilization changes from one
threshold to another threshold.
(Default: once)
August 2013