Debug Pcap Capture Drop-Nonip; Debug Pcap Capture Attach; Debug Pcap Capture Commit - Avaya 2330 Reference Manual

Troubleshooting commands

debug pcap capture drop-nonip

Use this command to disable the capturing of non-ip packets.
Syntax
drop-nonip
Example
AG# debug pcap capture cap1 AG/debug/pcap/capture cap1# drop-nonip

debug pcap capture attach

Use this command to configure a packet capture session for the interface.
Syntax
attach [bundle <bundle>] [ethernet <ethernet>]
Table 449: Variable definition
Variable
<bundle>
<ethernet>
Example
AG# debug pcap capture cap1 AG/debug/pcap/capture cap1# attach bundle
bun1

debug pcap capture commit

Use this command to commit packet capture configurations.
Syntax
commit
Example
AG# debug pcap capture cap1 AG/debug/pcap/capture cap1# commit
432 Command Line Reference
The bundle name.
The ethernet interface name.
Comments? infodev@avaya.com
Value
August 2013