Telnet Timeout; Tftp Server; Utc - Avaya 2330 Reference Manual

telnet timeout

You can configure the timeout value for Telnet sessions. A Telnet session disconnects if it
remains inactive for the configured session duration. Use this command to enable or disable
the telnet server.
Syntax
telnet_timeout <value>
Table 27: Variable definitions
<value>
Example
AG/configure# telnet_timeout 300

tftp server

Use this command to enable the TFTP service.
Syntax
[no] tftp_server
Example
AG/configure# tftp_server

utc

Use this command to set the current time for the AG2330 in relation to Coordinated Universal
Time (UTC).
Syntax
utc <+|-> <hour offset> <minute offset>
Command Line Reference
Variable Value
Enter the time in seconds (from 0 to 3600)
after which inactive Telnet sessions
automatically disconnect. The default value
is 900 seconds. If you enter a value of 0
seconds, inactive Telnet sessions do not
automatically disconnect.
telnet timeout
August 2013 59