Configure Process Cpu Start-Process; Configure Process Cpu Threshold Total - Avaya 2330 Reference Manual

CPU utilization commands

configure process cpu start-process

Use this command to start the CPU utilization data collection for individual processes.
Syntax
[no] start-process
Table 437: Variable definitions
[no]
Example
AG/configure/process cpu# start-process

configure process cpu threshold total

Use this command to configure the threshold for total CPU utilization.
Syntax
threshold total red <%red> green <%green> interval <interval>
Table 438: Variable definitions
<%red>
<%green>
<interval>
Example
AG/configure/process cpu# threshold total red 90 green 50 interval 10
398 Command Line Reference
Variable
Variable
Comments? infodev@avaya.com
Value
Stops the CPU utilization data collection for
individual processes.
Value
Red threshold in percentage. (Default: 85)
Green threshold in percentage. (Default: 70)
Duration in seconds for which the CPU
utilization is measured. You can enter
multiples of 10 up to a maximum of 300
seconds. (Default: 30)
August 2013