SNMP commands
Table 130: Variable definitions
[no]
Example
AG/configure/snmp-server# snmp-enable
configure snmp-server snmp-source
Use this command to configures the SNMP source IP address.
Syntax
snmp-source <A.B.C.D>
Table 131: Variable definitions
<A.B.C.D>
Example
AG/configure/snmp-server# snmp-source 10.12.3.4
configure snmp-server target-address
Use this command to configure target address attributes for traps or notifications and
informs.
Syntax
target-address <target addr name> <NMS ip> <target params name>
<target tag name> [retry-count] [timeout] [NMS port]
Table 132: Variable definitions
<target addr name>
<NMS ip>
<target params name>
140
Command Line Reference
Variable
Variable
Variable
Comments? infodev@avaya.com
Value
Disables the SNMP server.
Value
Specifies the SNMP source IP address.
Value
Specifies the name of the target address.
Specifies the IP address of the NMS in dot
format (a.b.c.d).
Specifies the name of the target parameter.
August 2013