Vlan Commands; Create Vlan - D-Link DGS-1100-06/ME Cli Reference Manual

The VLAN commands in the Command Line Interface (CLI) are listed (along with the appropriate
parameters) in the following table.
Command

create vlan

delete vlan
config vlan
config pvid
show vlan
enable asymmetric_
vlan
disable
asymmetric_vlan
show asymmetric_vlan
enable management
vlan
disable management
vlan
config management
vlan
show management
vlan
show port_vlan pvid
Each command is listed in detail, as follows:
create vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To create a VLAN v1, tag 3:
DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
Parameter
<string 20> {tag <int 2-4094>}
[<vlan_name 20> | vlanid <int 2-4094>]
[<vlan_name 20> | vlanid <vlanid 1-4094>] [[add [tagged | untagged] | delete ]
<portlist>
<int 1-4094> ports <portlist>
{<int 1-4094>}
<string 32>
To create a VLAN on the Switch.
create vlan <string 20> {tag <int 2-4094>}
The create vlan command creates a VLAN on the Switch.
<string 20> − The name of the VLAN to be created.
tag <int 2-4094> − The VLAN ID of the VLAN to be created. The
allowed values range from 2 to 4094.
Each VLAN name can be up to 32 characters. If the VLAN is not
given a tag, it will be a port-based VLAN.
Only administrator or operator-level users can issue this command.

VLAN COMMANDS

124
19