Confirming The System Configuration; F440-F Series System Configuration - Omron MicroHAWK F440-F Series User Manual

1 Communication Specifications Overview
1-1

Confirming the System Configuration

The F440-F/F430-F/F420-F Series is a smart camera that performs image-processing based inspec-
tions on captured images.
In a system configuration in which it is connected to a PLC, PC, or other external device, serial com-
mands can be received from, and code reading results can be output to the external device.
1-1-1

F440-F Series System Configuration

The F440-F can be used in the following types of system configurations.
Connection using Parallel Interface
Trigger inputs and OK/NG Judgement result outputs are received and sent over I/O cable.
Basic configuration
Smart Camera (F440-F)
*1
*1 If monitor display is not required, it is not necessary to connect with a PC during operation.
Connecting over Ethernet (EtherNet/IP, Serial (TCP), PROFINET)
Establish network connections via an Ethernet cable to input triggers and communication commands
and to output reading results (Judgment results and decoded content). Triggers can also be input over
parallel I/O. Using the data link function for each network (excluding Serial), data transfer can be done
periodically between the smart camera and the external device.
Basic configuration
Smart Camera (F440-F)
Switching hub
for EtherNet/IP
(industrial
Ethernet)
*1
1-2
I/O cable
V430-W8-3M
Ethernet cable
98-000133-01
Computer
AutoVISION
I/O cable
V430-W8-3M
Ethernet cable
98-000133-01
General-purpose
Ethernet cable
XS6W-5PUR8SS100CM-G
General-purpose
Ethernet cable
XS6W-5PUR8SS100CM-G
Computer
AutoVISION
F440-F/F430-F/F420-F Series Smart Camera User's Manual for Communication Settings (Z444)
External devices
Trigger sensor
I/O control PLC
External devices
Trigger sensor
I/O control PLC