System Configuration - Omron F440-F User Manual

C-mount smart camera

Hide thumbs Also See for F440-F:

Table of Contents

2 Installation and Connections

2-1

System Configuration

The following hardware configuration diagrams demonstrate some of the many ways the F440-F can be

deployed in an application. These configurations show Omron lenses and lighting. The F440-F can be used with

any vendor's lenses and lighting. Lighting can be either directly powered, or can use Strobe Out pulse on DIO 3.

2-1-1

System Configuration Examples

Example 1: FLV Series or Other External Lighting

Drawing

Reference

C-Mount Lens

F440-F C-Mount 5 MP Camera

Industrial High-Flex GigE Ethernet Cable with Jack Screws and RJ45 Connector

Industrial Switching HUB

M12-to-Flying Leads Cable

FLV Lighting

Lighting Controller

Industrial Ethernet Network Cable

*1. The V430-WQ cable (excluding V430-WQR / V430-WQK) can be used as an extension of the V430-W8 cable.

*2. A 24VDC power supply is not needed for the F440-F if a PoE switching HUB is used.

*3. Any vendor's lighting and power supply can be used with the F440-F. The I/O cable provides strobe signal to light power supply.

2-2