Shutter/Gain Tab - Omron STC-S133 Series Manual

Shutter/Gain Tab

Exposure Control Mode
AE
The brightness level is adjusting with the shutter and gain automatically.
It is necessary to set the shutter and the gain at "Normal AE" Tab.
HOLD
The shutter and gain are holding. When the brightness of the target is changed, the camera does not adjust the brightness.
Scale ME
The brightness level is adjusting by the shutter and gain.
User Preset ME
The brightness level is adjusting by the shutter and gain.
Full ME
The brightness level is adjusting the manual by the shutter and gain at "Full ME" Tab.
Convergence luminance
Set the convergence luminance for AE.
AE convergence speed setting
Set the AE convergence speed. When set greater number, the AE convergence speed increases.
Frame count for dead band
Set the number of the frame that use for the AE control start judgement.
Dead band / AE tracking AE
Set the AE convergence finish condition.
AE convergence is finished when AE error is less than this setting and keeps the same condition more than three frames.
Dead Band / AE convergence AE
Set the AE convergence start condition.
AE convergence starts when AE error is greater than this setting and keeps the same condition more than the frame counter
of the dead band.
EV correction
Set the amount of the exposure.
STC-S133 Series
Specifications
For more information please contact Aegis Electronic Group, Inc. *(888)687-6877 *aegis-g2@aegiselect.com *http://www.aegiselect.com
No.16S061-09
23/55