Save The Configuration - RADVision SCOPIA 100 MCU Quick Start Manual

S
AVE THE
C
ONFIGURATION
A IP
SSIGN AN
A
DDRESS TO THE
MVP
12 SCOPIA MCU Quick Start
100
The Export button on the toolbar allows you to save the MCU
configuration parameters as a file to your local hard disk or a
network directory.
Procedure
1. In the toolbar, click Export.
The Windows File Download dialog is displayed.
2. Check the Save this file to disk option in the
Windows File Download dialog and click OK.
The Windows Save As dialog is displayed.
3. In the File name text box, type a filename, for
example MCU1_NEW and select a location to
save this configuration setup.
4. Click Save.
The first time you install the MVP, you assign an IP address using
a terminal cable connection to access the boot configuration
menu. At power-up, the MVP goes through the following boot
phases:
Auto-boot—The embedded operating system initializes
and displays basic information.
Configuration menu—A six second countdown allows
you to enter the configuration menu.
Initialization—The MVP completes the boot sequence
and is ready for operation.
Note You can perform serial port configuration of the MVP only
at startup, during a short period indicated by a 6-second
countdown. Once the initialization phase is complete, the only
way you can access the configuration menu is by restarting the
MVP.