Performing Basic Configuration; Setting The Country And Language - RADVision SCOPIA XT1000 Series User Manual

Performing Basic Configuration

During this configuration you define some basic settings for your SCOPIA XT Series, like user
interface language, the system name, and network settings. Notice that your system
administrator might already have set these parameters for you.
In addition to fresh installations, you need to use the quick setup wizard after restoring default
settings and re-installing software.
The quick setup wizard guides you through the basic system configuration in these steps:
1.
2.
3.
4.
5.
The Quick Setup wizard automatically appears when you turn the Codec Unit on for the first time.

Setting the Country and Language

You can select the country in which the system is located and the language in which the system
menus are displayed.
Procedure
Step 1
Turn on the SCOPIA XT Series unit.
Step 2
If the Quick Setup wizard is not displayed automatically, start it by performing the following
steps:
a.
b.
RADVISION | User Guide for SCOPIA XT1000 Series Version 2.5
Setting the Country and Language page 9
Adjusting the Image Size page 10
Setting Date and Time page 12
Setting System Information page 13
Defining IP Settings page 13
In the Main Menu page, scroll to Settings.
Press Quick setup on the Remote Control Unit.
Getting Started | 9