Performing Basic Configuration; Accessing The Quick Setup Procedure - RADVision scopia xt5000 series Administrator's Manual

Performing Basic Configuration

Before you perform basic configuration for the XT Series, your system administrator should install and
activate your XT Series (for details, see the Quick Setup Guide for Scopia XT Series, the Installation
Guide for Scopia XT Series, and Safety Instructions leaflet for Scopia XT Series.
To start using your XT Series, first define basic settings, such as the system's language, the name of this
endpoint, and network settings. This is relevant for both new installations, and also after restoring default
settings and re-installing software.
Important:
Your system administrator might already have set these parameters for you and customized certain
features described in this guide to suit the environment of your company. If your administrator set up
PIN protection, you need the PIN number before continuing with the configuration.
You can define these settings as follows:
• Following the quick setup procedure on the XT Series endpoint.
We recommend this method to quickly start using your XT Series, since the quick setup wizard
includes only the basic required settings.
• Remotely defining the settings from the XT Series web interface (see
Interface
Your administrator may define some settings remotely, such as for the network or gatekeeper (see
Configuring Network Settings
interface if you have not already completed the procedure from the endpoint.
You cannot remotely set the image on the monitor; this must be done from the endpoint itself.
Navigation
•

Accessing the Quick Setup Procedure

•
Setting Basic System Information
Accessing the Quick Setup Procedure
About this task
Access the quick setup procedure to define basic settings for your Scopia XT Series, such as the
system's language, the name of this endpoint, and network settings. Follow the tasks of the quick setup
procedure in the order they are presented.
Administrator Guide for Scopia XT5000 Series Version 3.2
Important:
If you are enabling a second GLAN license option, the XT Codec Unit is restarted (see
Installing and Enabling Licenses which Extend System Functionality
details).
on page 32).
on page 88 for details). The quick setup is available from the web
on page 62
on page 54
on page 48 for
Accessing XT Series Web
Initial Configuration | 54