Performing Basic Configuration - RADVision SCOPIA XT4000 Series User Manual

Step 6

Performing Basic Configuration

During this configuration you define some basic settings for your SCOPIA XT Series, like user
interface language, the system name, and network settings. Notice that your system
administrator might already have set these parameters for you.
In addition to fresh installations, you need to use the quick setup wizard after restoring
default settings and re-installing software.
The quick setup wizard guides you through these basic configuration tasks:
The tasks appear in this section in the order they are presented in the quick setup wizard.
The quick setup wizard automatically appears when you turn the XT Codec Unit on for the
first time. If the quick setup wizard is not displayed automatically, select Configure on the
Main Menu page and then select Quick setup.
RADVISION | User Guide for SCOPIA XT4000 Series Version 3.0
Select one of the options using the arrow keys of the XT Remote Control Unit.
•
Setting the System Name and Language-related Settings ............................. page 10
•
Adjusting the Image Position .............................................................. page 11
•
Configuring Network Settings ............................................................. page 12
•
Configuring Gatekeeper Settings ......................................................... page 13
Figure 3-1 Main menu
Getting Started | 9