Performing Basic Configuration - RADVision Scopia XT Executive User Manual

Note
This requires installing the Scopia XT Control utility, as described in
Control" on page
By default, your computer screen is always displayed when you are not in a call. The Scopia
XT Control
used to control your computer:
To switch control to the Scopia XT Executive menus, select the Scopia XT Control
The Scopia XT Control
and mouse are being used to control the Scopia XT Executive menus:
To switch control back to your computer, do one of the following:

Performing Basic Configuration

Before you perform basic configuration for the Scopia XT Series, your system administrator
should install and activate your XT Series (for details, see the Quick Setup Guide for Scopia XT
Series, the Installation Guide for Scopia XT Series, and Safety Instructions leaflet for Scopia
XT Series.
To start using your Scopia XT Series, first define basic settings, such as the system's language,
the name of this endpoint, and network settings. This is relevant for both new installations,
and also after restoring default settings and re-installing software.
RADVISION | User Guide for Scopia XT Executive Version 3.1.1
33.
icon appears in your taskbar, indicating that the keyboard and mouse are being
•
Using your mouse, select the window in the layout displaying your desktop.
•
Using your keyboard, press Backspace, or CTRL+SHIFT+1.
•
During a call, click the window in the layout that is displaying your computer screen.
•
When you are not in a call, you can also press one of the following keys using your XT
Remote Control Unit:
–
Delete
–
Present
–
Back
icon on your taskbar becomes gray, indicating that the keyboard
"Installing Scopia XT
icon.
Getting Started | 25