Pre Heater Menu; Fixer (Platen) Menu - Oce CS9160 User Manual

4.7.1.9

Pre Heater menu

Set up to acclimatize and preheat the media before printing.
Notes
• The temperature to be set for the Pre Heater varies depending on the media which is used.
For recommended temperature settings of Pre Heater, refer to the "Recommended media list".
Setup Item
Pre Heater

4.7.1.10 Fixer (platen) menu

Set up this menu to warm up the loaded media and improve the printing quality. (Ink fixation)
Notes
•
The temperature to be set for the Fixer (Platen) varies depending on the media which is used.
For recommended temperature settings of Fixer (Platen), refer to the "Recommended media
list".
Setup Item
Fixer (platen)
Heater
Setting Value
OFF / <30° C> to 50° C
—
Setting Value
OFF / <30° C> to 50° C
—
User's Guide Océ CS9160 printer
Set up the Pre Heater temperature.
1. Roll media
2. Pre Heater
3. Print head
•
[Enter] key: Save the setting and shift to the
previous hierarchy.
•
[Cancel] key: Cancel the setting and shift to
the previous hierarchy.
► User media menu
Set up the fixer (platen) temperature.
1. Roll media
2. Fixer (Platen) Heater
3. Print head
• [Enter] key: Save the setting and shift to the
previous hierarchy.
• [Cancel] key: Cancel the setting and shift to
the previous hierarchy.
► User media menu
77 AP-40790 – Rev 2.0 -23/08/2011,
Description
3 2
Description
3 2
1
1