User Media Menu - Oce CS9090 User Manual

Chapter 5: Handling the printer
5.4.1.6

User media menu

Make various settings on user defined media.
In the User media menu, for each setup value of following printing operation, eight settings of "user media 1-
8" can be set.
Notes
When media other than the recommended media are used (user media), the following problems may occur:
•
Media detection error
•
Oblique, torn, and creased media
•
Media jams
•
Decrease in print quality due to blurring, missing, or smudging of ink
•
End detection error of roll media
Problems caused by using media other than the recommended will void the warranty.
For more information, contact your local Océ representative
Setup items
User media 1-8 (1/3)
User media 1-8 (2/3)
User media 1-8 (3/3)
Type (1/3-3/3)
AP-75036 - Revision 1.3 – 20/03/06
Parameters Description
Thin Out Sets the amount of ink discharged while printing according to the
media type.
InkDryTime In order to let the ink for the printing dry, the time between the end
of the print and the beginning of the next print is set.
HeadHeight Sets the distance (head height) between the print head and the
media.
Vacuum Sets the intensity of the fans.
Fan Mode To activate ALL the fans or the one under the media.
Thickness Makes the setting on the thickness of the media to be used.
Heater Sets the temperature of the Heater.
Drier Sets the temperature of the Drier.
Fixer Sets the temperature of the Drier.
Post Fixer Sets the temperature of the Drier.
HStatus Checks the temperature of heating elements.
Dist.Adj Performs various settings for media feed compensation.
- [CANCEL] key: to shift to the previous hierarchy menu.
88 User's Guide CS9000 series