Connecting The Centronics Interface - Oce CS9265 Installation Manual

5.3.3 Connecting the Centronics interface

5.3.3.1 Installation
The procedure for connecting the Centronics interface is explained below.
To connect the printer to your computer, follow the steps below.
Step 1 : Power OFF the printer and your computer.
Step 2 : Plug the cable connector of the interface cable into the interface connector at the back of the
printer. Squeeze the wire clips together until they lock into place.
Step 3 : Plug the other end of the cable into the computer's port.
Notes
•
R
EFER TO YOUR COMPUTER
' U ' G
S SER S UIDE FOR THE PROCEDURE TO CONNECT TO YOUR COMPUTER
37
CS9200 Low Solvent series printers
AP-40301 – Rev. 2.0 – 02/05/2008
.