Chapter 4: Preparing for a job
4.8.3 Connecting the Centronics interface
The procedure for connecting the Centronics interface is explained below.
To connect the printer to your computer, follow the steps below.
Turn off the printer and your computer.
Step 1 :
Plug the cable connector of the interface cable into the interface connector at the back of the
Step 2 :
printer. Squeeze the wire clips together until they lock into place.
Plug the other end of the cable into the computer's port.
Step 3 :
Notes
Refer to your computer's manual for the procedure to connect to your computer.
AP-75036 - Revision 1.3 – 20/03/06
1
Centronics interface connector
2
Interface cable
66
User's Guide CS9000 series