Required media not available
Required media not available
Required media not available
When the Océ Power Logic
available on the printer, the printer operator panel displays a media request. The
system produces a short interrupted audio signal. The red LEDs of the printer
operator panel remain illuminated. Replace the media roll to continue. The following
shows an example of the message.
[210]
End of roll
End of roll
When two media rolls contain the same type of media and the end of one roll is
reached, the printer automatically switches to the other roll.
When the end of the media roll is reached during printing and the other roll does not
contain the same media type, the system produces a short interrupted audio signal.
The red LEDs on the printer operator panel flash two times.
If necessary the output is dried, the printer takes back the output and delivers the
output at the front side of the printer.
Note: If you stop the drying procedure, the printer moves the remaining piece of
media to the back side of the printer. You must remove this piece of media manually.
264
Chapter 12 System messages and solutions
®
controller tries to print on a type of media that is not