Chapter 3: Setting up the unit
Notes
•
Avoid the following temperature and humidity conditions. Otherwise, printed images may appear
differently from what you expect:
Places where sudden changes in temperature and humidity are expected, even though the
condition is within the range written above.
Places where direct sunlight or excessive lighting are expected.
Places where air conditioners blow directly.
•
Océ recommends that the printer should be installed where air conditioning can be adjusted easily.
3.4.1.2
Required space
Install the product on a flat surface that fulfills the following conditions.
Notes
Refer to "Product Specifications" of the User's Guide for the information of the product.
AP-75036 - Revision 1.3 – 20/03/06
38
a = 1500mm
b = 1500mm
c = 2500mm
d = 600mm
e = 1250mm
User's Guide CS9000 series