Caution
W
HEN REMOVING THIS PRODUCT FROM THE PACKAGING BOX
. H
THE SIDE OF THE PRODUCT
,
DROPPING THE UNIT
RESULTING IN DAMAGE
3.1 UNPACK THE PRINTER
Step 1 :
Remove the winder box and starter kit. Be sure to use a forklift to remove the winder box.
Step 2 :
Remove the top card board.
3 UNPACKING PROCEDURE
OLDING THE UNIT OVER THE VINYL PLASTIC WRAPPING CAN RESULT IN SLIPPAGE AND
.
CS9200 Low Solvent series printers
,
ALWAYS REMOVE THE VINYL PLASTIC
21
,
AND HOLD ON
AP-40301 – Rev. 2.0 – 02/05/2008