Configuring The Network Printer Port - Oce fx2081 User Manual

7
Confirm the displayed contents and click [Next].
8
Restart the PC to finish installation.
9
The print port is set for "FILE" just after the Océ fx2081 PCL printer
driver has been installed. Therefore, you need to change the port accord-
ing to the following steps (see "Configuring the network printer port"
below).

2.5.1 Configuring the network printer port

NOTE
You need to log on as an administrator to configure the network printer
port.
1
Open the "Printers" folder.
• In Windows 2000, click [Start] g "Settings" g "Printers".
• In Windows XP Home Edition, click [Start] g "Control Panel" g "Print-
ers and Other Hardware" g "Printers and Faxes".
• In Windows XP Professional and Windows Server 2003, click [Start] g
"Printers and Faxes".
• In Windows / Vista / Server 2008, click [Start] g "Control Panel" g
"Hardware an Sound" g "Printers".
• In Windows 7, click [Start] g "Control Panel" g "Hardware an Sound"
g "Devices and Printers".
2-6