Rename Menu - Oce CS9090 User Manual

5.4.4.14 Rename menu

To change file name of printing data saved in the hard disk.
Notes
•
Re-name menu is displayed if a hard disk has been installed.
•
The file name of printing data sent from the computer is always set to "TEMPFILE000".
To save transmitted image data, change the file name to a name of your choice in the Rename folder
before transmitting the next printing data.
Setup items Parameters
To-be-changed Characters you want to change
file name
Characters you can use are :
A-Z or 0-9
-
AP-75036 - Revision 1.3 – 20/03/06
Description
To select characters you want to change by operating
the following keys.
•
[F1] key: To select characters you want to
change with back feed way.
•
[F3] key: To select characters you want to
change with forward feed way.
To select to-be-changed characters by operating
following keys.
•
[F2] key: Selects to-be-changed characters with
back feed way.
•
[F4] key: Selects to-be-changed characters with
forward feed way.
•
[ENTER] key: Confirms the new value, shifts to
the previous hierarchy menu.
•
[CANCEL] key: Cancels setup value, shifts to the
previous hierarchy menu.
115
Chapter 5: Handling the printer
User's Guide CS9000 series