(1) Media Width menu
NOTE
Setting a larger value than the media width set in the Media Width menu may cause ink to
leak on the media or printer.
Setup item
Media Width
(2) MediaWidth menu
Setup item
MediaWidth
5.1.6
Output Mode menu
Sets the media operation after printing.
NOTE
When the take-up unit is not installed, do not set Output mode to "Take-up". By doing so,
the product will be unable to function properly.
When the Output Mode menu is set to "Take-up", the setting for the Prev. Stick menu is
disabled.
5.1.9 Prev. Stick menu
Setup item
Output mode
Setting
210mm to <1000mm> to
1371mm
—
Setting
**** mm
—
Setting
<Off>
Take-up
Auto Cut
—
5-120
CS9350 OPERATION MANUAL
Description
Set the media width.
•[Enter] key: saves the setting and shifts to the previous menu.
•[Cancel] key: cancels the setting and shifts to the previous
menu.
5.1.1.1 User Type menu
Description
Display the media width that is detected while initializing.
•[Cancel] key: shifts to the previous menu.
5.1 Setup menu
Description
Set when not cutting the media automatically after printing.
(Set it to "Off" even when cutting the media manually.)
Set when using the take-up unit.
(The media will not be cut after printing.)
Set when cutting the media automatically.
5.1.7 Method of Cut menu
•[Enter] key: saves the setting and shifts to the sub menu.
5.1.6.1 Ink Drying Time Menu
•[Cancel] key: cancels the setting and shifts to the previous
menu.
5.1 Setup menu