Write Mode Menu - Oce CS9090 User Manual

Setup items
File management (1/2)
File management (2/2)
File management (1/2-
2/2)

5.4.4.11 Write mode menu

To set the writing and printing method of printing data to the hard disk.
Notes
•
Write mode menu has been displayed if a hard disk has been installed on the product.
•
When writing printing data to the hard disk, be sure to set media in the tray.
The printing data is sized to fit the media.
If there is no media in the tray, the printing data cannot be written.
Setup items Parameters
Writing <Off>
Writing/Printing
Printing after writing
Writing only
-
AP-75036 - Revision 1.3 – 20/03/06
Parameters Description
Write mode To set writing method of printing data to the hard disk and printing
method.
Re-print Set this when you want to draw the printing data saved on the
hard disk.
Delete Set this when deleting the printing data saved on the hard disk.
Re-name To change file name of the printing data saved on the hard disk.
Format To perform formatting of hard disk.
- • [CANCEL] key: To shift to the previous hierarchy menu.
Description
No writing to the hard disk. Performs printing immediately.
Prints while writing the data to the hard disk.
Prints after writing the data to the hard disk.
Writes the data to the hard disk without printing.
Printing method can be set for printing data saved in the hard
disk by Re-print menu
To shift to the previous hierarchy menu.
Notes
113
Chapter 5: Handling the printer
User's Guide CS9000 series