Define The Time-Outs; About The Time-Out Settings - Oce TDS400-CS User Manual

Define the time-outs

About the time-out settings

Introduction
You can use time-out settings to define the behaviour of the Océ TDS400-CS
if the Océ TDS400-CS remains unused for a time.
Time-out settings of the Océ TCS4 scanner
You can define the following time-out settings for the Océ TCS4 scanner.
The set time-out of an opened set in a copy job.
When the scanner remains unused for a time after a set was opened, the set
closes automatically.
The panel time-out of the scanner operator panel.
When the scanner operator panel remains unused for a time, the scanner
operator panel returns to the home screen automatically. The Océ TCS4
scanner is ready for the next user.
The sleep mode time-out of the scanner.
When the Océ TCS4 scanner remains unused for a time, the Océ TCS4
scanner enters the sleep mode automatically and saves energy. When the
Océ TCS4 scanner enters the sleep mode, the job settings are set to default.
The time that the Océ TCS4 scanner enters the sleep mode depends on
Note:
the values of the above settings and the status of the Océ TCS4 scanner.
Time-out settings of the Océ TDS400 printer
You can define the following time out settings for the Océ TDS400 printer.
The sleep mode time-out of the printer.
When the Océ TDS400 printer remains unused for a time, the Océ TDS400
printer enters the sleep mode automatically and saves energy.
There is no sleep mode time-out for the Océ Power Logic
Note:
124 User manual
®
controller.