Configure The 'Media Request Time-Out - Oce ColorWave 600 User Manual

Configure the 'Media request time-out'

Configure the 'Media request time-out'
Introduction
The Printer operator panel displays a media request when a media is requested that
is not available. When this setting is disabled, the media request will be displayed
until it is resolved.
Note: When enabled, the 'Action after media request time-out' setting determines if
the printer either deletes the job or puts the job in attention state when the media
request is not resolved within a given period.
When to do
Enable the setting and define a suitable time-out period that does not interfere with
the print productivity. To avoid the deletion of jobs, disable this setting.
How to configure the 'Media request time-out'
Click 'Preferences' - 'System defaults' - 'Timers'.
1.
Click 'Edit' in the 'Timers' bar or click the value of the 'Media request time-out'
2.
setting.
When you enable the setting, you must enter a time period as well. If you choose to
3.
disable the setting, the time period will not be adjustable.
Click 'Ok' to confirm you entries or 'Cancel' to reject your entries.
4.
How to configure the 'Action after media request time-out'
Click 'Preferences' - 'System defaults' - 'Timers'.
1.
Click 'Edit' in the 'Timers' bar or click the value of the 'Action after media request
2.
time-out' setting.
Click 'Put the job on attention state' or 'Delete the job'.
3.
Click 'Ok' to confirm you entries or 'Cancel' to reject your entries.
4.
104 Chapter 4 Configure the printing system