Hstatus Menu; Distance Adjustment Menu; Change Menu - Oce CS9090 User Manual

Chapter 5: Handling the printer

5.4.1.16 HStatus menu

Check the temperature of the heating elements.
Notes
A stands for the Heater.
B stands for the Fixer.
C stands for the Post Fixer.
D stands for the Dryer.
Press the [CANCEL] key to go to the previous menu.

5.4.1.17 Distance adjustment menu

To perform various settings for media feed compensation
Notes
For details of the distance adjustment, refer to "Distance adjustment".
Setup items Parameters
Dist.Adj Print1
Change
Print2
-

5.4.1.18 Change menu

Change the distance adjustment value.
Setup items Parameters
Change 90.00%-<100.00%>-110.00%
AP-75036 - Revision 1.3 – 20/03/06
Description
Performs printing by media feed compensation.
A correction pattern with a width of ± 0.20% (in steps of 0.10 %) is printed
around the center of the correction value currently set.
Changes the media feed compensation value.
The menu changes to the Change Media Feed Correction Value menu.
Performs printing by media feed compensation (for fine adjustment).
A correction pattern with a width of ± 0.02% (in steps of 0.01%) is printed
around the center of the correction value currently set.
[CANCEL] key: Shifts to the previous hierarchy menu.
92
Description
Changes the media feed compensation value by
operating the following keys.
• [F2] key: to increase the setup value.
• [F4] key: to decrease the setup value.
• [ENTER] key: to confirm the setup value
• [CANCEL] key: to cancel the setup value
User's Guide CS9000 series