Cleaning The Mirror (No. 5 Mirror); Routing The Light-Blocking Belt - Canon NP6251 Service Manual

6. Cleaning the Mirror (No. 5 mirror)

1) Remove the copyboard glass.
2) Remove the lens hood.
3) Remove the mirror guide plate.
4) Move the lens stage in the direction of Enlarge.
5) Remove the screw, and remove the mirror cleaning tool.
6) While butting the mirror cleaning tool
mirror by moving the tool in the direction of the arrow.
At this time, be sure that your finger or the cleaning tool will not touch the No. 4
mirror.

7. Routing the Light-Blocking Belt

COPYRIGHT © 1997 CANON INC.
Download service manual and resetter printer at http://printer1.blogspot.com
against the No. 5 mirror as shown, clean the
Figure 11-214
Light-blocking belt 1
Light-blocking belt 2
Figure 11-215
CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 11 TROUBLESHOOTING
Light-blocking belt 3
Light-blocking belt 4
11-15