NEC Univerge SV8100 Features And Specifications Manual page 601

UNIVERGE SV8100
Up to 12 Predefined Instant Message Templates are supported per DT750/Sophisticated

user.
For Contact Database pop up to occur on incoming trunk calls Caller ID information must

be provided.
DTPlusWare Version 1.xx does not provide a contact pop-up for caller ID that is restricted

or not provided. This type of call does not allow re-direct to be selected during contact
pop-up.
The DTPlusWare interface supports event monitoring for a maximum of 200 ports.

While SV8100 V4.xx or higher supports time zones for DT700 series terminals when an IP

terminal is in XML mode the time shown will be from the DTPlusWare server.
A maximum of five Redirect Numbers are supported per DTPlusWare Client.

If the extension range is changed in SV8100 programming and DTPlusWare has an

existing user database, then the users will need to be deleted and new users matching the
new extension range added in DTPlusWare.
The Extension number (User Name) cannot be changed as it is read only. The user must

be deleted and a New User added.
Mobile Extension Feature: To be answered automatically and provided internal dial tone

from your extension, the Caller ID must be sent from Mobile Phone to SV8100 for
authentication purposes.
IIS Web server by default responds to HTTP (Hyper Text Transfer Protocol) URL's which

are not secure when accessed externally over the internet. It is recommended that any
access via Web/iPhone client over the internet use a secure communication channel (SSL/
HTTPS). Enabling SSL/HTTPS can be changed in the IIS server manager. For instructions
on How to enable HTTPS Service in IIS, refer to Microsoft documentation.
The telephone dial pad may stop responding when a XML graphic popup appears. Under

this condition hang up on the attempted call and redial again.
Restrictions
All trunks used for the System Calling feature must be in trunk group 1.

Trunks not in trunk group 1 cannot be used for the System Calling feature.

All trunks used for the System Calling feature must have answer supervision.

Viewing contacts in the Corporate Active Directory requires LDAP be setup on the

Exchange server.
An iPhone cannot receive Instant Messages (IM) from other DTPlusWare client phones.

During incoming call pop-up, Redirect does not work with a voice call.

When using Desktop Suite and DTPlusWare in the same system, DTPlusWare must have

the TAPI option disabled in configuration.
DTPlusWare
Issue 12.0
2 - 571