4.2.4 Removing the Unit Panel Cover
Loosen the two screws on the Front
Step 1 :
Cover Right Cover Shaft and push the
Front Cover to the left.
Loosen the Unit Panel Cover Screw by 3
Step 2 :
mm or remove it.
Slide the Unit Panel Cover to the left (in
Step 3 :
the direction of arrow A) and remove it
towards you (in the direction of arrow B).
Reinstall all parts in the opposite order of
Step 4 :
the removal procedure.
4.2.5 Removing the Heater Panel Cover
Remove the Front Cover
Step 1 :
Remove the Unit Panel Cover
Step 2 :
Remove the four screws of the Heater
Step 3 :
Panel Assembly.
Reinstall all parts in the opposite order of
Step 4 :
the removal procedure.
4.2.6 Removing the Y Rail Cover
Remove the Unit Panel Cover.
Step 1 :
Refer to "Removing Unit Panel Cover"
Remove the Front Cover.
Step 2 :
Refer to "Removing Front Cover"
Remove the Cartridge Covers (2 screws).
Step 3 :
Remove the Y Rail Cover Screws (5 screws)
Step 4 :
Remove the Y Rail Cover by lifting it up.
Step 5 :
Reinstall all parts in the opposite order of the
Step 6 :
removal procedure.
Rockhopper 38 – Maintenance Manual
36
AP-74038, Rev. 1.1, 25/01/05