12. Engineer Maintenance
12.1. Removing Covers (3/9)
cf. Maintenance Manual (XPJ-1641SR:Rev.00-3.2.5./XPJ-1682SR:Rev.00-3.2.5.)
Panel Unit
Preparation:
・
None
Screws:
・
None
[1] Open front cover.
[2] Lift panel unit.
・
Press front latch(es) (x2).
・
Lift the front portion
・
Pull the unit.
・
Panel Unit is fixed with 4 latches in the front stay R.
[3] Remove panel FFC.
[4] Remove panel unit.
[5] To Assemble unit, reverse the removal procedure.
CSTM-XPJ16xxSR(E)_1.00
cf. Maintenance Manual (XPJ-1641SR:Rev.00-3.2.6./XPJ-1682SR:Rev.00-3.2.6.)
Front Cover (1/2)
Minimum two people are required for this process.
Preparation:
・
Phillips Screwdriver No.2
[2]
・
Hex wrench 4mm
Screws:
・
Washer M3x5 (x4)
・
P Tight Bind M3x6 (x4)
・
Hexagon Socket Head Bolt M4x10 (x2)
[1] Remove side cover R.
[2]
[2] Remove side cover L.
[3] Remove panel unit.
[4] Remove screw(s).
・
Washer M3x5 (x4)
[5] Remove screw(s).
[3]
・
P Tight Bind M3x6 (x2)
[6] Remove rotary dumper 3NL.
[7] Remove screw(s).
・
P Tight Bind M3x6 (x2)
Page.
127
To Table of Contents
[4]
[4]
[5]
[6]
[7]
CONFIDENTIAL