Problems Relating To Online And Functions - MUTOH spitfire 90 Maintenance Manual

9.3.6. Problems relating to online and functions

No. Phenomenon
1 Online has not been
properly established
by Centronics.
2 Online has not been
properly established
by the network.
3 Scaling is not
functioning correctly.
4 Mirroring is not
functioning correctly.
5 Other functions are
not performing
correctly.
6 The printing position
has been misaligned.
Check point
(1) Check the
Centronics settings in
the operation panel.
(2) Replace the
interface cables and
see if errors still occur.
(3) The program ROM
may have failed.
(4) The Mainboard
assembly may have a
problem.
(1) Check if the cables
in use for connections
are correct.
(2) Check the network
settings in the
operation panel for
problems.
(1) The program ROM
may have failed.
(2) The Mainboard
assembly may have a
problem.
(1) Check if CW
adjustments are made
correctly.
(2) Check the top &
bottom adjustments
(3) The program ROM
may have failed.
(4) The Mainboard
assembly may have a
problem.
313
Spitfire – Maintenance Manual
Action
• Change the setting.
• Trouble such as an open
interface cable or cables
that are too long may
cause communication
failure. An instruction must
be given so that only
cables compliant with the
standard are used.
• Upgrade the firmware
version.
• Replace the Mainboard
assembly.
• Use 100BASE-T cross
cables for direct
connections to the host.
• Use 100BASE-T straight
cables for connections
using HUBs.
• Reset the settings upon
confirmation by an network
administrator.
• Upgrade the firmware
version
• Replace the Mainboard
assembly
• Make adjustments.
• Make adjustments.
• Upgrade the firmware
version
• Replace the Mainboard
assembly
Refer to
→ User's Guide
-
→ Firmware
installation
→ Replacing the
Mainboard assembly,
HDD_Extension
board assembly,
HEAD_DRV board
assembly and cooling
fan assembly
-
→ User's Guide
→ Firmware
installation
→ Replacing the
Mainboard assembly,
HDD_Extension
board assembly,
HEAD_DRV board
assembly and cooling
fan assembly
→ CW adjustment
menu
→ Top & Bottom
adjustment menu
→ Firmware
installation
→ Replacing the
Mainboard assembly,
HDD_Extension
board assembly,
HEAD_ DRV board
assembly and cooling
fan assembly
AP-74096, Rev. 1.0, 09/06/05