Name Of The Parts And Functions; Front Section - MUTOH ValueJet VJ-1604W Operation Instructions Manual

2.1 NAME OF THE PARTS AND FUNCTIONS

Be sure to read and understand the safety warnings before handling the printer.

2.1.1 Front section

8
7
13
10
9
6
5
N° Name
Media loading lever
1
Operation panel
2
Front cover
3
Waste fluid tank
4
Stand
5
Media guide
6
platen
7
pressure rollers
8
Media cut groove
9
Maintenance cover
10
Waste fluid valve
11
adjuster
12
Media retainers
13
12
Function

Used to fix or release the media. Lower the lever to fix the media.

Lower the lever further to fix the media more firmly. Used to improve the
accuracy of media feeding.

Raise the lever to release the media.
Operation condition setting, printer display and various function settings are performed.
Used to prevent that a user comes in contact with the driving mechanism during the
printer operation. Opened and closed when media is set or jammed. It is normally closed.
Used for collecting waste ink discharged from the printer.
To install the printer on a levelled floor.
Used to feed the media smoothly.
Installed inside of the front cover.
Installed inside of the front cover.
Press and hold the media when printing.
Installed inside of the front cover.
Used to cut media straight.
Used to prevent the user from touching the inner mechanical section.
Open and close in the following cases.

When cleaning the wiper.

When cleaning around the printer.
It is normally closed.
Open and close when discharging the waste fluid from the waste fluid tank. It is normally
closed.
Used to install the printer horizontally
To prevent media to curl up at the sides. This way you avoid head strikes and damage.
Operation instructions ValueJet 1604W
3 13
12
16 AP-77300 – Rev 1.1 -17/09/2009,
Chapter 2: Product overview
2
10
1
4
11
5