Right Crankcase Cover Removal - Honda CBF600SA Service Manual

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.

RIGHT CRANKCASE COVER REMOVAL

Drain the engine oil (page 3-15).
Remove the bolt and clutch cable guide plate, then
disconnect the clutch cable end from the clutch lifter
lever.
Release the EOP switch wire from the clamp.
Remove the right crankcase cover bolts and clamp.
Remove the right crankcase cover while turning the
The lifter lever
clutch lifter lever counterclockwise to disengage the
spindle is engaged
lifter lever spindle from the lifter piece.
with the clutch lifter
piece inside of the
right crankcase
Be careful not to drop the thrust/wave washers into
cover.
the crankcase when removing the right crankcase
cover.
Remove the thrust washer and wave washer from
the starter idle gear.
email: info@motomatrix.co.uk
CLUTCH/STARTER CLUTCH/GEARSHIFT LINKAGE
CLUTCH CABLE
LIFTER LEVER
BOLTS
GUIDE PLATE
BOLT
RIGHT CRANKCASE COVER
CLAMP
LIFTER LEVER
WAVE WASHER
THRUST WASHER
9-5