Hydraulic Brake; Service Information - Honda NX250 1989 Manuals

SERVICE INFORMATION

BRAKE FLUID RE PLACEMENT/BLEEDING 14-3
SERVICE INFORMATION
GENERAL
The brake pads can be removed without disconnecting the hydraulic system.
Do not allow foreign material to enter the system when filling the reservoir.
Always check brake operation hefore riding the motorcycle.
hose or brake hose stay from tivistrng or bending.
A ciif"nrt;sfsii/i',.' {•r.tkf disc orpad reducesstopping power. Discard contaminated padi and clean a cottiamirtated disc with a high
Quality brake degreasing agent-
assemblies. Dse an OSHA-approved vacuum cleaner or alternate methfd approved b/ OSHA designed to minimize ihe hazard
SPECIFICATIONS
Front dfsc thickness
Front disc runout
Front master cylinder LD.
Front master piston O
Front call per cylinder I.D,
Front caliper cylinder 0
Specified brake Muid
TORQUE VALUES
Brake hose joint jrnaster cylinder siaei
Master cyHnder cover sciew
Front brake light suvitch screw
Brake pad pin
Brake pad pin plug
TOOL
Special
Snap ring pliers
BRAKE PAD/DISC
G MASTER CYLINDER
BRAKE CALIPER
STANDARD
DOT 4 ori]y
35 N*m 13 5 kg-m, 25 fl-4b]
35 N-m 13.5 kg-m
14 NTH 11.4 kg-m, 10 ft-lh)
TO ft-lbl Apply oi' to the threads
25 W-fn |2.5kg-m, 18+t-lb)
10 W'm H1.0 kg-m, 7 ft-lb)
1.0 N*m 10 1 kg-m
23 N-m {2.3 kg-m, 17 ft*>)
0 7 9 1 4 - 3 2 3 0 0 0 1 or equivalent commercially available in U.S.A

14. HYDRAULIC BRAKE

Apply a locking agent to the threads
Unit: mm lint
SERVICE LIMIT
3.0 (0.121
0.3 (Q,01t
2706 (1.065]
1 4 - 1