Mazda CX-7 2007 Workshop Manual page 1647

B-PILLAR UPPER TRIM REMOVAL/INSTALLATION
09-17-16 INTERIOR TRIM
1. Remove the following parts:
(1) Front seat belt upper anchor installation bolt (See 08-11-2 FRONT SEAT BELT REMOVAL/
INSTALLATION.)
(2) Front scuff plate inner (See 09-17-19 FRONT SCUFF PLATE REMOVAL/INSTALLATION.)
(3) Rear scuff plate inner (See 09-17-19 REAR SCUFF PLATE REMOVAL/INSTALLATION.)
(4) B-pillar lower trim (See 09-17-16 B-PILLAR LOWER TRIM REMOVAL/INSTALLATION.)
2. Partially peel back the seaming welt.
3. Remove the screw.
4. Pull the B-pillar upper trim outward and detach
clip A and locator pin B.
5. Pull the B-pillar upper trim downward and detach
the tabs and clip C.
6. Remove the B-pillar upper trim.
End Of Sie
2007 Mazda CX-7 Workshop Manual (1871–1U–06B)
INTERIOR TRIM
TAB
SEAMING WELT
FRONT
C
B
B-PILLAR UPPER
A
TRIM
SCREW
id091700802100
CLIP C
CLIP A
LOCATOR PIN B
acxuuw00000680
09-17
09-17-16–1