Mazda CX-7 2007 Workshop Manual page 1605

GLASS PANEL REMOVAL/INSTALLATION
1. Fully close the glass panel.
2. Fully open the sunshade.
3. Remove the screws, and then remove the glass
panel.
4. Peel the weatherstrip off the glass panel.
5. Install in the reverse order of removal.
6. Adjust the glass panel. (See 09-15-3 GLASS
PANEL ADJUSTMENT.)
End Of Sie
GLASS PANEL ADJUSTMENT
1. Fully close the glass panel.
2. Measure the gap and height between the glass panel and body.
3. If not as specified, loosen the glass panel installation screws and reposition the glass panel.
Clearance
a: 0— 2.7 mm {0— 0.106 in}
b: 0 mm {0 in}
4. Tighten the installation screws.
5. Insert a credit card between the weatherstrip and
the body of the vehicle. Verify that the sunroof is
shut tightly (there is resistance when the credit
card is moved).
• If the sunroof is not shut tightly, readjust by
performing Steps 3 and 4.
End Of Sie
SUNROOF
GLASS PANEL
WEATHERSTRIP
PLASTIC CARD
id091500800500
SCREW
acxuuw00001166
GLASS PANEL
acxuuw00001167
id091500800600
A
A
A
A
A
A
b
a
Sec. A
—
acxuuw00001171
WEATHERSTRIP
acxuuw00001172
09-15–3
09-15
(+)
(-)
A