Mazda CX-7 2007 Workshop Manual page 1569

FRONT DOOR LOCK ACTUATOR INSPECTION
1. Apply battery positive voltage and connect ground
to the corresponding front door lock actuator
terminals, and inspect the front door lock actuator
operation.
• If not as specified, replace the front door latch
and lock actuator.
Lock actuator
operation
Lock
Unlock
End Of Sie
REAR DOOR LOCK ACTUATOR INSPECTION
1. Apply battery positive voltage and connect ground
to the corresponding front door lock actuator
terminals, and inspect the front door lock actuator
operation.
• If not as specified, replace the front door latch
and lock actuator.
Lock actuator
operation
Lock
Unlock
End Of Sie
DOOR LOCK-LINK SWITCH INSPECTION
Front/rear
1. Inspect for continuity between the door lock-link
switch terminals.
• If not as specified, replace the front door latch
and lock actuator.
Lock knob
LH: 2F
position
RH: 2A
Lock
Unlock
End Of Sie
FRONT DOOR KEY CYLINDER SWITCH INSPECTION
1. Inspect for continuity between the front door key
cylinder switch terminals.
• If not as specified, replace the front door latch
and lock actuator.
Key cylinder
position
Unlock
Lock
SECURITY AND LOCKS
Connection
B+ GND
LH: 1A LH: 1B
RH: 1B RH: 1A
LH: 1B LH: 1A
RH: 1A RH: 1B
Connection
B+ GND
LH: 1A LH: 1B
RH: 1B RH: 1A
LH: 1B LH: 1A
RH: 1A RH: 1B
: Continuity
Terminal
LH: 2B LH: 2E
RH: 2E RH: 2B
acxuuw00002472
: Continuity
Terminal
2A 2B
R
R : 1 k ohm
acxuuw00002474
LOCK UNLOCK
M
1B
1A
RH: 1B
RH: 1A
LOCK UNLOCK
M
1A 1B
RH: 1B
RH: 1A
LH
UNLOCK
RH
LOCK
2E 2F
2B
RH: 2B
RH: 2E RH: 2A
UNLOCK
LOCK
2B
2A
id091400800800
1A
1B
acxuuw00002469
id091400800900
1B 1A
09-14
acxuuw00002470
id091400801200
2E 2B 2A
2F
2E 2B 2A
acxuuw00002471
id091400801300
2F 2E 2B 2A
acxuuw00002473
09-14–7