Mazda CX-7 2007 Workshop Manual page 1566

8 Liftgate latch and lock actuator
(See 09-14-10 LIFTGATE LATCH AND LOCK
ACTUATOR REMOVAL/INSTALLATION.)
(See 09-14-10 LIFTGATE LOCK ACTUATOR
INSPECTION.)
(See 09-14-10 LIFTGATE LATCH SWITCH
INSPECTION.)
9 Card key
(See 09-14-29 CARD KEY BATTERY
REPLACEMENT[ADVANCED KEYLESS
SYSTEM].)
(See 09-14-33 CARD KEY ID CODE
REGISTRATION[ADVANCED KEYLESS
SYSTEM].)
(See 09-14-34 CLEARING CARD KEY[ADVANCED
KEYLESS SYSTEM].)
10 Transmitter
(See 09-14-26 TRANSMITTER BATTERY
REPLACEMENT[KEYLESS ENTRY SYSTEM].)
(See 09-14-28 TRANSMITTER ID CODE
REGISTRATION[KEYLESS ENTRY SYSTEM].)
11 Keyless receiver
(See 09-14-36 KEYLESS RECEIVER REMOVAL/
INSTALLATION.)
(See 09-14-36 KEYLESS RECEIVER
INSPECTION.)
End Of Sie
FRONT DOOR KEY CYLINDER REMOVAL/INSTALLATION
WM: DOOR LOCK AND OPENER
1. Disconnect the negative battery cable.
2. Remove the following parts:
(1) Inner garnish (See 09-17-20 INNER GARNISH REMOVAL/INSTALLATION.)
(2) Front door trim (See 09-17-20 FRONT DOOR TRIM REMOVAL/INSTALLATION.)
(3) Front outer handle (See 09-14-8 FRONT OUTER HANDLE REMOVAL/INSTALLATION.)
3. Remove the rod from the front door key cylinder.
4. Turn the key cylinder in the direction indicated by
the arrow and move the tab to the notch.
5. Pull the front door key cylinder outward to remove
it.
6. Install in the reverse order of removal.
End Of Sie
09-14–4
SECURITY AND LOCKS
12
13
14
Keyless control module
(See 09-14-30 KEYLESS CONTROL MODULE
REMOVAL/INSTALLATION[ADVANCED KEYLESS
SYSTEM].)
(See 09-14-30 KEYLESS CONTROL MODULE
INSPECTION[ADVANCED KEYLESS SYSTEM].)
(See 09-14-32 KEYLESS CONTROL MODULE
CONFIGURATION[ADVANCED KEYLESS
SYSTEM].)
(See 09-14-35 CUSTOMIZED FUNCTION
SETTING PROCEDURE[ADVANCED KEYLESS
SYSTEM].)
Coil antenna
(See 09-14-11 COIL ANTENNA REMOVAL/
INSTALLATION.)
Steering lock unit
(See 09-14-35 STEERING LOCK UNIT ID CODE
REGISTRATION[ADVANCED KEYLESS
SYSTEM].)
id091400800300
DOOR
KEY CYLINDER
NOTCH
TAB
acxuuw00002464