System-Monitor Enable - H3C S3100-52P Command Manual

Command Manual – System Maintenance and Debugging
H3C S3100-52P Ethernet Switch
period: Reboot period of the switch, in the format period = { daily | { monday | tuesday
| wednesday | thursday | friday | saturday | sunday }* }. daily indicates the reboot
period is one day, that is, the switch reboots at a specified time every day. { monday |
tuesday | wednesday | thursday | friday | saturday | sunday }* indicates the week
day when the switch reboots.
Description
Use the schedule reboot regularity command to enable the periodical reboot of the
switch and set the reboot time.
Use the undo schedule reboot regularity command to cancel the configured reboot
period.
By default, the reboot period of the switch is not configured.
Note:
The switch timer can be set to a precision of one minute, that is, the switch will reboot
within one minute after the specified reboot date and time.
After you execute the command, the system will prompt you to confirm. Enter "Y" or "y"
for your setting to take effect. Your setting will overwrite the previous one (if available).
If you adjust the system time by the clock command after executing the schedule
reboot regularity command, the schedule reboot regularity command will be
invalid.
Related commands: reboot, schedule reboot at, undo schedule reboot, display
schedule reboot.
Examples
# Schedule a reboot so that the switch reboots at 10:00 every Thursday.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] schedule reboot regularity at 10:00 thursday
Schedule reboot regularity, are you sure?[Y/N]:y
[Sysname]

3.1.23 system-monitor enable

Syntax
system-monitor enable
undo system-monitor enable
Chapter 3 Device Management Commands
3-22