Display Fan; Display Memory - H3C S9500 Series Command Manual

Command Manual – Device Management
H3C S9500 Series Routing Switches

1.1.7 display fan

Syntax
display fan [ fan-id ]
View
Any view
Parameters
fan-id: the fan ID.
Description
Use the display fan command to view the working state of the built-in fans. User can
perform this command to see if they work normally.
Examples
# Display the working state of the fans.
<H3C> display fan
Fan 1 State: Normal

1.1.8 display memory

Syntax
display memory [ slot slot-no ]
View
Any view
Parameters
slot-no: Specifies slot number
Description
Use the display memory command to display memory situation.
Examples
# Display memory situation.
<H3C> display memory slot 0
System Total Memory(bytes): 197932416
Total Used Memory(bytes): 65234704
Used Rate: 32%
Chapter 1 Device Management Commands
1-6