Display Memory - H3C S5830V2 Series Command Reference Manual

Syntax
display debugging [ module-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
module-name: Displays the debugging settings of the specified module. To display the current module
name, use the display debugging ? command.
Examples
# Display all enabled debugging functions.
<Sysname> display debugging
ARP status debugging switch is on
Related commands
debugging

display memory

Use the display memory command to display the system memory statistics.
Syntax
display memory [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
slot slot-number: Specifies an IRF member device ID. If this option is not specified, the command displays
the memory statistics of all IRF member devices.
Examples
# Display the memory statistics of the device.
<Sysname> display memory
The statistics about memory is measured in KB:
Slot 1:
Mem:
-/+ buffers/cache:
Swap:
total used
2019300 318600
234100
0 0
free shared
1700700 0
1785200
0
2
buffers cached
0 84500